» Motorcycles for sale in Canada » Triumph » Bonneville » 1972 Triumph Bonneville

This custom hard-tail Triumph is project that was started nearly two years ago, with hundreds of hours of work poured into it. This bike began as an oil in frame rolling chassis, with XXXX Bonneville XXX engine. 
The sub-frame was cut off, and Factory Metal Works Hard-Tail Kit was welded in. The frame was then sandblasted, and powder coated using ?�?Bonded Black Chrome?�? color from powderXXX. The wheels were disassembled, powder coated with the same color, and re-laced. New Duro vintage style tires were installed on the front and rear wheels. The front and rear hubs are of the ?�?conical?�? type, and were polished, with accents of black. The front brake hub actuator/cover was disassembled, the levers were tumbled, and the cover was powder coated in mirror black. The front fork legs were also powder coated black, with strip of polished metal down the sides. New fork tubes and seals were installed on assembly.
The engine started out as XXXX Bonneville XXX X-speed. The entire engine was completely disassembled, sludge trap cleaned, and rebuilt with the following items:X. New NSK crankshaft bearingsX. New rod bearing shellsX. New sludge trap allen head plugX. All new seals from MAP Cycle X. All new gaskets (EMGO)X. Cylinders bored from stock to .XXX?�? overX. New Emgo pistons with Hastings rings X. Valve seats cutX. New Black Diamond valvesXX. New bronze valve guides with valve seals XX. Head surfacedXX. New pushrodsDue to issues with the original transmission, low mileage four speed was installed. Exhaust:The exhaust is an upswept style pipe, purchased from BritechNew England, and wrapped in titanium color heat wrap.Aluminum exhaust inserts were pressed into the exhaust ports to allow mounting of the pipes.Electrical/Ignition:The electrical system on this bike has been simplified. A Podtronics unit was installed that eliminates the Zener Diode, and the rectifier, which greatly improves reliability,and creates more simple system.The original wiring harness was simplified by removing excess wiring that was not needed. A Boyer Brandsen Electronic Ignition was installed, and works flawlessly. The battery is in brown leather tool pouch that is underneath the seat. Lighting:The front headlight is ?�?Tri-Bar?�? style halogen conversion. This light utilizes XXW Standard HX style halogen bulb which improves visibility compared to old Lucas or Stanley lights.Paint:The gas tank and rear fender were professionally painted by BP Customs. It utilizes deep burgundy with black designs, and silver pin striping to give it an original vintage look, but custom at the same time.Other New Parts:Throttle cablesNOS Clutch CableNOS Front Brake CableSpeedometer cableCarburetors rebuilt using Amal rebuild kitsFootpeg rubbersRear Brake Stop SwitchRear tail light Drive ChainNuts, bolts, and brass spacersWillie Max Leather ToolbagBatteryOil LinesFuel LinesHeadlight BucketBungs from Lowbrow CustomsSeat hingeSeatGas tank mounting rubbersSummary:This bike starts on X/X kicks with tickle of the carbs, runs great with plenty of power. clear Massachusetts title is in my name, and in hand. Trades may be considered for certain vintage motorcycles, interest in Kawasaki ZX and HX/HX.
If you would like to see video of the bike running, message me your email and will send you one.
Also published at eBay.ca

Sell Triumph Bonneville Motorcycle

Other Triumph motorcycles offered via internet auctions: